MTI Analyzer Hydrocarbon Catalytic Convertor 1211-010-220

Description
Most hydrocarbon processing plants and transportation pipelines require the use of chemical analysis instrumentation. These analytical instruments require a stable outlet vent pressure referenced to atmospheric pressure for proper operation. This reference may be achieved by venting the sample to atmosphere. Some of the vented samples contain hydrocarbons, referred to as fugitive emissions. Fugitive emissions are air pollutants and contribute to worldwide environmental concerns.

The focus of the Analyzer Hydrocarbon Catalytic Convertor is the use of a catalytic conversion process to oxidize vented samples while maintaining an atmospheric pressure reference. The device utilizes a continuous heat source to allow effective conversion of intermittent as well as continuous vent streams.

Specifications
Dimensions: 13” high 3” diameter (19” h with junction box; junction box 3.75”diameter)
Weight: 10 pounds (4.5 kilograms)
Flow Rate: 1 liter / minute (0.035 scfm)
(2,000 btu / hour maximum)
Power Consumption: 100 watts (max) (110/120 vac, 50/60 hz)